The UK's First Ever
Bungy Trampoline

	Complete Bungy Units	Bungy Trampoline Offers

Bungee Trampoline Spare Parts (that's Bungy Parts too you know)

Winch ropes, top ropes and motors for bungees

You'll see that Jumpzone provide bungee trampoline spare parts to customers all around the world including the UK. We have spare bungy parts for most bungee configurations including the 4 in 1 bungee and the 1 in 1 trampoline. See below for our excellent spare parts deals and call our parts sales manager directly: Andy Sinclair +44 (0)7500 113504
with your enquiry. You can also:

contact Jumpzone for spare bungee parts

Spare Bungee 4 in 1 Winch rope

4 in 1 Winch rope, 9mm dia Nylon braid, 8.5M in length with slant cut both ends. £15.00

4 in 1 Top Rope, 10mm dia Nylon braid, 15M in length complete with one thimble rope knotted and shrink tube placed over £31.00

Bungee Trampoline Spare 1 in 1 Winch rope

1 in 1 Winch rope, 9mm dia Nylon braid, 17M in length with slant cut both ends. £22.00

1 in 1 Top Rope, 10mm dia Nylon braid, 7M in length complete with one thimble rope knotted and shrink tube placed over £18.00

Spare bungee motor winch

Bungy motor winch, 230 volt, 50 hz
1P44, IS classB , 30 AVV/H , KW 0.75

Complete with winch rope including fittings.

Our fantastic motors are available with rope and are selling at £395 plus VAT

Spare bungee harness

Body harness, designed for use on the all bungy trampolines. Padded waist and legs, includes waist and leg buckles (difficult for rider to undo) buckles are made from ultra light aluminum alloy. Cross webbing between both straps for ultimate support, colour coordinating for fast selection. Reinforced/double stitching at both connecting locations

Available in Small: Red/Black Medium: Blue/Black Large: Black

The harness cost is £ 125 plus VAT

Wedge Kit

After consultation with Health & Safety it is recommended that all 4 IN 1 EuroBungy trampolines have Motor Wedges fitted to the base plate, with Nylon pucks as a stops. The Wedges are designed to tilt the Winch motor to an angle where the rope payin and payout at the maximum shock cord loading point travels through the centre of the Winch Motor stop bar. You then clamp the Puck to the rope, this will now act as the stop, hitting the Winch Motor stop bar squarely once set.

The Wedge Kit contains: